You are here: > Airbrush > Airbrush Replacement Parts > Iwata Replacement Parts > Parts for Iwata NEO Airbrushes > Optional Parts for converting an Iwata NEO TRN2 .5mm to a .35mm
Optional Parts for converting your Iwata NEO TRN2 to a .35mm tip size.
Scroll to bottom of page to see exploded parts diagram.
Sort By:
Page of 1
Iwata airbrush part I-165-1 I-165-1 Spanner Wrench

This spanner wrench is for removing the fluid nozzle. Do not over-tighten!

List Price: $6.18
Our Price: $4.50
In Stock
N-075-3 Needle .35mm for Iwata NEO N5500 TRN1 N-075-3 Needle .35mm for Iwata NEO N5500 TRN1

This is the N-075-3 Needle .35mm for Iwata NEO N5500 TRN1. This part is optional for converting the N5000 TRN2 to a .35mm nozzle/needle configuration.

List Price: $6.18
Our Price: $5.56
(Out of Stock)
N-080-3 Nozzle .35mm for Iwata NEO N5500 TRN1 N-080-3 Nozzle .35mm for Iwata NEO N5500 TRN1

This is the N-080-3 Nozzle .35mm for Iwata NEO N5500 TRN1. This part is optional for converting the N5000 TRN2 to a .35mm nozzle/needle configuration.

List Price: $13.65
Our Price: $12.28
In Stock
N-135-3 Head Base for N 5500 TRN1 N-135-3 Head Base for N 5500 TRN1

N-135-3 Head Base for N 5500 TRN1 (Optional for TRN2)

List Price: $6.18
Our Price: $5.56
In Stock
N-140-3 Nozzle Cap .35 mm for Iwata NEO N5500 TRN1 N-140-3 Nozzle Cap .35 mm for Iwata NEO N5500 TRN1

This is the N-140-3 Nozzle Cap .35 mm for Iwata NEO N5500 TRN1. This part is optional for converting the NEO N5000 TRN2 to a .35 mm needle/nozzle configuration.

List Price: $6.18
Our Price: $5.56
In Stock