You are here: > Airbrush > Airbrush Replacement Parts > Iwata Replacement Parts > Parts for Iwata Hi-Performance Plus > Parts for Iwata Hi-Performance Plus HP-SB Plus
Sort By:
Page of 1
Cylinder Jar Set for Side-feed Airbrushes - 1 ounce SOLVENT PROOF Cylinder Jar Set for Side-feed Airbrushes - 1 ounce SOLVENT PROOF

Add versatility to any side-feed Iwata airbrush with these bottles and cups

Fits models HP-SB Plus, CM-SB, Eclipse-SBS

All plastic construction means no rust and that it's solvent-proof

No gasket guarantees against deterioration

List Price: $8.63
Our Price: $6.38
In Stock
Cylinder Jar Set for Side-feed Airbrushes - 2 ounce SOLVENT PROOF Cylinder Jar Set for Side-feed Airbrushes - 2 ounce SOLVENT PROOF

  Add versatility to any side-feed Iwata airbrush with these bottles and cups

 Fits models HP-SB Plus, CM-SB, Eclipse-SBS

 All plastic construction means no rust and that it's solvent-proof

 No gasket guarantees against deterioration

List Price: $8.63
Our Price: $6.38
In Stock
Fluid Needle 0.2 mm - I-075-1 Fluid Needle 0.2 mm - I-075-1

List Price: $13.65
Our Price: $9.94
In Stock
Fluid Nozzle 0.2 mm - I-080-7 Fluid Nozzle 0.2 mm - I-080-7

List Price: $42.49
Our Price: $30.94
In Stock
I-015-1 Air Valve I-015-1 Air Valve

List Price: $10.30
Our Price: $7.50
In Stock
I-030-1 Air Valve Set I-030-1 Air Valve Set

This is the complete air valve assembly. Comes already assembled. Just unscrew the old one and screw the new one in.

List Price: $42.49
Our Price: $30.94
In Stock
I-035-1 Air Valve spring I-035-1 Air Valve spring

List Price: $6.18
Our Price: $4.50
In Stock
I-045-2 Blanking cover for Side-Feed I-045-2 Blanking cover for Side-Feed

List Price: $6.18
Our Price: $4.50
In Stock
I-070-3 Fluid Cup 1/8 oz I-070-3 Fluid Cup 1/8 oz

List Price: $42.49
Our Price: $30.94
In Stock
I-070-4 Fluid Cup 1/4 oz I-070-4 Fluid Cup 1/4 oz

List Price: $42.49
Our Price: $30.94
(Out of Stock)
I-070-6 Fluid Cup 1/2 oz I-070-6 Fluid Cup 1/2 oz

List Price: $42.49
Our Price: $30.94
In Stock
I-105-0 Crown Cap (Optional) I-105-0 Crown Cap (Optional)

 Can replace the needle cap on most Iwata airbrushes

 Decreases paint build-up on the needle and in the nozzle cap, eliminating spitting

 Shorter length allows for finer detail work while still protecting the needle

List Price: $20.86
Our Price: $15.19
In Stock
I-110-1 Needle Cap I-110-1 Needle Cap

List Price: $10.30
Our Price: $7.50
In Stock
I-125-7  Needle Packing Screw I-125-7 Needle Packing Screw

List Price: $10.30
Our Price: $7.50
In Stock
I-135-2 Needle Spring for BCS/HP-A/HP-SB I-135-2 Needle Spring for BCS/HP-A/HP-SB

List Price: $6.18
Our Price: $4.50
In Stock
I-140-1 Nozzle Cap - 0.2 mm I-140-1 Nozzle Cap - 0.2 mm

List Price: $20.86
Our Price: $15.19
In Stock
I-145-1 Packing for air piston (O-ring) I-145-1 Packing for air piston (O-ring)

List Price: $6.18
Our Price: $4.50
In Stock
I-155-5 Pre-set cutaway handle I-155-5 Pre-set cutaway handle

List Price: $42.49
Our Price: $30.94
In Stock
Iwata airbrush part I-165-1 I-165-1 Spanner Wrench

This spanner wrench is for removing the fluid nozzle. Do not over-tighten!

List Price: $6.18
Our Price: $4.50
In Stock
I-175-1 Valve Piston I-175-1 Valve Piston

List Price: $6.18
Our Price: $4.50
In Stock
Main Lever - I-100-1 Main Lever - I-100-1

List Price: $20.86
Our Price: $15.19
(Out of Stock)