Liquitex Modeling Paste|
Heavy Body and very opaque.
marble paste made of marble dust and 100% polymer emulsion.
to build heavy textures on rigid supports and create three-dimensional
to the hardness of stone. It can be sanded or carved when thoroughly
be handled like clay if the top of the container is removed and some of
the water is allowed to slowly evaporate until it reaches a clay-like
to any non-oily, absorbent surface.
too quickly causes mud cracking that is usually cosmetic, not
mixed with acrylic colors will act as a weak tinting white, while
increasing thickness and rigidity.
substrate for acrylic paint, oil paint, oil pastel, oil bars,
watercolor, graphite or dry pastel.
with knife, brush, cake decorating tools, etc.
prevent shrinkage cracks (mud cracking), dry slowly by covering loosely
with plastic wrap. Apply less than 1/4" thick.
with acrylic colors to produce a colored tinted paste.
dry, Acrylic Modeling Paste may be painted with acrylic or oil colors.
Apply in thin layers allowing each layer to dry before applying next
layer. If cracks appear, allow to dry and fill in with additional thin
layer of Acrylic Modeling Paste.
support: Use straight from container.
support: Mix Acrylic Modeling Paste 50/50 with Gloss Gel Medium,
Matte Gel Medium, Gloss Heavy Gel Medium, or Super Heavy Gel Medium.
Apply a thin layer of Acrylic Modeling Paste to rigid surface (i.e.
wood), using a palette knife, trowel or roller. Let dry, then sand
smooth. Repeat if necessary.
ground: Mix 1 part Acrylic Modeling Paste with 3 parts Liquitex® Acrylic Gesso. Apply with trowel or roller. Let
dry, then sand smooth. Repeat if necessary.
Mix Acrylic Modeling Paste 50/50 with Liquitex Gloss Gel Medium, Matte
Gel Medium or Gloss Heavy Gel Medium. Soak paper in this mixture.