|
|
|
|
 |
|
Galkyd 8 Oz
|
List Price $13.45 Sale Price: $10.09
In Stock!
|
|
|

Galkyd is made from alkyd resin, the polymerized oil of the 20th century. The medium adds binder (increases adhesion) and speeds up drying. High viscosity alkyd resin was among the materials Jackson Pollack used to make his drip paintings. To make a similar mixture, use 60% Galkyd and 40% oil color. No more than 50% solvent by volume can be added to Galkyd without compromising its binder.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Galkyd 16 Oz
|
List Price $22.95 Sale Price: $16.29
In Stock!
|
|
|

Galkyd is made from alkyd resin, the polymerized oil of the 20th century. The medium adds binder (increases adhesion) and speeds up drying. High viscosity alkyd resin was among the materials Jackson Pollack used to make his drip paintings. To make a similar mixture, use 60% Galkyd and 40% oil color. No more than 50% solvent by volume can be added to Galkyd without compromising its binder.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Galkyd 32 Oz
|
List Price $41.45 Sale Price: $30.26
In Stock!
|
|
|

Galkyd is made from alkyd resin, the polymerized oil of the 20th century. The medium adds binder (increases adhesion) and speeds up drying. High viscosity alkyd resin was among the materials Jackson Pollack used to make his drip paintings. To make a similar mixture, use 60% Galkyd and 40% oil color. No more than 50% solvent by volume can be added to Galkyd without compromising its binder.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Galkyd G-gel 150 ml
|
List Price $17.45 Sale Price: $12.39
In Stock!
|
|
|

G-Gel is a gelled alkyd resin painting medium, formulated for painters who want to create transparent impasto. It can be applied in multiple layers. G-Gel does not contain driers so it does not dry as fast as most gel mediums.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Galkyd Lite 8oz
|
List Price $13.45 Sale Price: $10.09
In Stock!
|
|
|

Galkyd Lite is different from Galkyd because it is made from an alkyd resin that has a lower viscosity. The viscosity of Galkyd Lite is very similar to that of a traditional damar, refined linseed oil or turpentine painting medium. In addition to pleasing painters who prefer a lighter painting medium, the longer working time of Galkyd Lite (approximately three hours) will delight landscape painters and others who enjoy painting outdoors. Thin layers will be ready to paint over within 24 hours. Galkyd Lite thins with odorless mineral spirits. Because of its lower viscosity, Galkyd Lite will leave brush strokes in thicker layers. Glazes made with Galkyd Lite look slightly less glossy than those made with traditional mediums or Galkyd. However, like Galkyd, Galkyd Lite is formulated to thin oil colors and maintain strong flexible paint films. Galkyd Lite is ready to use and available in glass bottles.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Galkyd Lite 16oz
|
List Price $22.95 Sale Price: $16.29
In Stock!
|
|
|

Galkyd Lite is different from Galkyd because it is made from an alkyd resin that has a lower viscosity. The viscosity of Galkyd Lite is very similar to that of a traditional damar, refined linseed oil or turpentine painting medium. In addition to pleasing painters who prefer a lighter painting medium, the longer working time of Galkyd Lite (approximately three hours) will delight landscape painters and others who enjoy painting outdoors. Thin layers will be ready to paint over within 24 hours. Galkyd Lite thins with odorless mineral spirits. Because of its lower viscosity, Galkyd Lite will leave brush strokes in thicker layers. Glazes made with Galkyd Lite look slightly less glossy than those made with traditional mediums or Galkyd. However, like Galkyd, Galkyd Lite is formulated to thin oil colors and maintain strong flexible paint films. Galkyd Lite is ready to use and available in glass bottles.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Galkyd Lite 32oz
|
List Price $41.45 Sale Price: $30.26
In Stock!
|
|
|

Galkyd Lite is different from Galkyd because it is made from an alkyd resin that has a lower viscosity. The viscosity of Galkyd Lite is very similar to that of a traditional damar, refined linseed oil or turpentine painting medium. In addition to pleasing painters who prefer a lighter painting medium, the longer working time of Galkyd Lite (approximately three hours) will delight landscape painters and others who enjoy painting outdoors. Thin layers will be ready to paint over within 24 hours. Galkyd Lite thins with odorless mineral spirits. Because of its lower viscosity, Galkyd Lite will leave brush strokes in thicker layers. Glazes made with Galkyd Lite look slightly less glossy than those made with traditional mediums or Galkyd. However, like Galkyd, Galkyd Lite is formulated to thin oil colors and maintain strong flexible paint films. Galkyd Lite is ready to use and available in glass bottles.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Gamblin Cold Pressed Linseed Oil 8 Oz
|
List Price $18.75 Sale Price: $13.69
In Stock!
|
|
|

Cold pressed linseed oil is produced from the first pressing of flax seeds without using heat or chemicals of any kind. It increases the tendency of oil paints to
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Gamblin Gamvar Picture Varnish 5.4 oz.
|
List Price $15.75 Our Price $13.23
In Stock!
|
|
|

Gamvar is a low molecular weight synthetic resin varnish developed by conservation scientists at the National Gallery. It looks as good as damar natural resin varnish, but never yellows. Like damar it has a high shine and will saturate the colors of paintings and intensify the transparency of glazes. Gamvar is easy to remove with mild solvents. The 5.4 oz. package (of ready to prepare solvent and resin chunks) covers up to 10 square feet of oil or acrylic paintings and can also be used for retouch.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Gamblin Mediums set
|
List Price: $24.95 Our Price: $19.71
In Stock!
|
|
|

This sampler of painting mediums offers an introduction to understanding their role in a modern painting studio. The set includes 37ml Galkyd G-Gel Medium, 2 oz. Galkyd Lite Painting Medium, 2 oz. Gamsol odorless Mineral Spirits, 2 oz. Refined Linseed Oil, 2 oz. Neo-Megilp, 2 oz. Cold Wax Medium plus a mediums chart and a solvent comparison chart.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Gamblin Poppyseed Oil 8 Oz
|
List Price $19.95 Sale Price: $14.36
In Stock!
|
|
|

Poppy oil’s slow drying time may be useful for painters using wet into wet techniques. Adding 10% by volume, poppy oil slows down the drying time of Gamblin Galkyd painting mediums. Available in an 8 oz. container.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Gamblin Refined Linseed Oil 8 oz.
|
List Price $9.75 Sale Price: $7.02
In Stock!
|
|
|

Pressed from American flax seeds, this refined linseed oil is as light and pure as industrially produced linseed oil can be. Use in moderation to thin oil colors or as a medium for traditional powdered pigments.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Gamblin Refined Linseed Oil 16 oz.
|
List Price $16.75 Sale Price: $12.23
In Stock!
|
|
|

|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Gamblin Refined Linseed Oil 32 oz.
|
List Price $26.75 Sale Price: $19.26
In Stock!
|
|
|

|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Gamsol - Oms 16 Oz
|
List Price $12.75 Sale Price: $9.56
In Stock!
|
|
|

Gamsol is the safest, cleanest and 100% pure odorless mineral spirit. Gamsol is strong enough to thin oil colors and Gamblin alkyd resin mediums and can be reused until the solvent will no longer clear. Gamsol cannot dissolve damar or other natural resins, and will cloud damar varnish if used as an extender.
28% off list
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Gamsol - Oms 32 Oz
|
List Price $18.75 Sale Price: $13.88
In Stock!
|
|
|

Gamsol is the safest, cleanest and 100% pure odorless mineral spirit.
Gamsol is strong enough to thin oil colors and Gamblin alkyd resin
mediums and can be reused until the solvent will no longer clear.
Gamsol cannot dissolve damar or other natural resins, and will cloud
damar varnish if used as an extender.
MATERIAL SAFETY DATA SHEET Manufacturer's Name: GAMBLIN ARTISTS COLORS CO. PO Box 625 Portland, OR 97207
Product: GAMSOL ------------------------------------------------------------------------------------------------------------------------------------------- SECTION 1 -- PRODUCT IDENTITY ------------------------------------------------------------------------------------------------------------------------------------------- Date prepared: 11/28/94 Emergency telephone no. 503/235-1945 Preparer's Name: R. Gamblin HMIS Information Health 1 Chemical name: Petroleum Solvent Mixture Flammability 2 Reactivity 0 Chemical formula: N/A (mixture) DOT shipping class: Combustible Liquid ------------------------------------------------------------------------------------------------------------------------------------------ SECTION II -- HAZARDOUS INGREDIENTS ------------------------------------------------------------------------------------------------------------------------------------------ Chemical names CAS# Wt% ACGIH TLV Hydrotreated heavy naphtha 64742-48-9 100% 300ppm for an 8 hr work petroleum day
It consists predominantly of C11-C13 isoparaffinic hydrocarbons.
C11-C15 saturated hydrocarbons MIXTURE 99% C84 aromatics MIXTURE Less than 0.02%
This product and all components are listed on the U.S. TSCA inventory. These are reportable chemicals under 40 CFR 372. SARA Title III Section 313 ------------------------------------------------------------------------------------------------------------------------------------------- SECTION III -- PHYSICAL CHARACTERISTICS--------------------------------------------------------------------------- ---------------------------------------------------------------- Boiling Range: 365-403 degrees F Specific gravity: (15.6 C/15.6 C) (0.77) Vapor pressure: <10mm Hg@ 25C % volatile (volume): 100 @ 1 atm ASTM D 2879 and 25 C (77 F) Vapor density: >5 Evaporation rate (BuOAc = 1): 0.1
Solubility (specify solvents): Insoluble in water. Soluble in most petroleum solvents. Appearance and odor: Clear water-white liquid; essentially odorless.
------------------------------------------------------------------------------------------------------------------------------------------- SECTION IV -- FIRE & EXPLOSION DATA -------------------------------------------------------------------------------------------------------------------------------------------
Flash point: 145 degree F Flammable Limits: LEL: 0.6 VEL: 7.0 Extinguishing media: CO2 , dry chemical, water fog
GAMSOL MSDS PAGE 2
Special firefighting procedures: water or foam may cause frothing if directed into container of burning material. Use water to cool containers exposed to heat. Unusual fire & explosion hazards: contaminated rags or other easily ignited organic materials are spontaneously combustible. Immerse in water after use. Reactivity: product is stable Hazardous polymerization: will not occur Conditions to avoid: None known. Hazardous decomposition products: Fumes, smoke, carbon monoxide, aldehydes and other decomposition products, in the case of incomplete combustion. Usual products of combustion: CO, CO2 and possibly acrolein. ------------------------------------------------------------------------------------------------------------------------------------------- SECTION V -- HEALTH HAZARD DATA ------------------------------------------------------------------------------------------------------------------------------------------- Route(s) of entry: Eye contact, ingestion, inhalation, skin contact. Acute health effects: Eye contact may cause redness or irritation Inhalation: dizziness, headache, nausea, possible nervous system depression. Ingestion: Nausea, gastrointestinal irritation, or vomiting. Skin contact: May cause rash, cracking, dryness or defatting of skin. EMERGENCY FIRST AID PROCEDURES: Eye contact: wash with clean water for at least fifteen minutes. If irritation persists, get medical attention. Inhalation: If overcome by vapor, remove from exposure and call a physician immediately. If breathing is irregular or has stopped, start resuscitation, administer oxygen, if available. Skin contact: In case of skin contact, wash skin thoroughly with soap and water. CHRONIC HEALTH EFFECTS: Skin contact may aggravate an existing dermatitis. ----------------------------------------------------------------------------------------------------------------------------------------- SECTION VI -- SPILL OR LEAK PROCEDURE ----------------------------------------------------------------------------------------------------------------------------------------- Steps to be taken in case material is spilled: remove all sources of ignition. Soak up spill with absorbent materials. Waste disposal method: Rags and absorbent materials should be immersed in water. Small amounts can be dried and disposed of as ordinary trash. ------------------------------------------------------------------------------------------------------------------------------------------- SECTION VII - SPECIAL PROTECTION DATA ------------------------------------------------------------------------------------------------------------------------------------------- Respiratory protection: Use supplied-air respiratory protection in confined or enclosed spaces, if needed. Ventilation: Use only with venilation sufficient to prevent exceeding recommended exposure limit or buildup of explosive concentrations of vapor in air. No smoking, flame or other ignition sources. Protective gloves: Use chemical-resistant gloves, if needed, to avoid prolonged or repeated skin contact. Eye protection: safety glasses if eye contact is likely; eyewash fountain should be accessible. ------------------------------------------------------------------------------------------------------------------------------------------- SECTION III -- STORAGE & HANDLING DATA ------------------------------------------------------------------------------------------------------------------------------------------- Precautions to be taken in handling and storage: store away from high temperature, sparks or open flame. Read and observe all precautions on product label. Other precautions: wash hands after use. Immerse contaminated rags in water. The information contained herein is based on the data available to use and is believe to be correct. However, Gamblin Artists Colors Co. makes no warranty, expressed or implied, regarding the accuracy of these data or the results to be obtained from the use thereof. Gamblin assumes no responsibility for injury from the use of the product described herein.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Gamsol OMS - 1 gallon (128 Oz)
|
List Price $41.75 Sale Price: $30.48
In Stock!
|
|
|

Gamsol is the safest, cleanest and 100% pure odorless mineral spirit. Gamsol is strong enough to thin oil colors and Gamblin alkyd resin mediums and can be reused until the solvent will no longer clear. Gamsol cannot dissolve damar or other natural resins, and will cloud damar varnish if used as an extender.
MATERIAL SAFETY DATA SHEET Manufacturer's Name: GAMBLIN ARTISTS COLORS CO. PO Box 625 Portland, OR 97207
Product: GAMSOL ------------------------------------------------------------------------------------------------------------------------------------------- SECTION 1 -- PRODUCT IDENTITY ------------------------------------------------------------------------------------------------------------------------------------------- Date prepared: 11/28/94 Emergency telephone no. 503/235-1945 Preparer's Name: R. Gamblin HMIS Information Health 1 Chemical name: Petroleum Solvent Mixture Flammability 2 Reactivity 0 Chemical formula: N/A (mixture) DOT shipping class: Combustible Liquid ------------------------------------------------------------------------------------------------------------------------------------------ SECTION II -- HAZARDOUS INGREDIENTS ------------------------------------------------------------------------------------------------------------------------------------------ Chemical names CAS# Wt% ACGIH TLV Hydrotreated heavy naphtha 64742-48-9 100% 300ppm for an 8 hr work petroleum day
It consists predominantly of C11-C13 isoparaffinic hydrocarbons.
C11-C15 saturated hydrocarbons MIXTURE 99% C84 aromatics MIXTURE Less than 0.02%
This product and all components are listed on the U.S. TSCA inventory. These are reportable chemicals under 40 CFR 372. SARA Title III Section 313 ------------------------------------------------------------------------------------------------------------------------------------------- SECTION III -- PHYSICAL CHARACTERISTICS--------------------------------------------------------------------------- ---------------------------------------------------------------- Boiling Range: 365-403 degrees F Specific gravity: (15.6 C/15.6 C) (0.77) Vapor pressure: <10mm Hg@ 25C % volatile (volume): 100 @ 1 atm ASTM D 2879 and 25 C (77 F) Vapor density: >5 Evaporation rate (BuOAc = 1): 0.1
Solubility (specify solvents): Insoluble in water. Soluble in most petroleum solvents. Appearance and odor: Clear water-white liquid; essentially odorless.
------------------------------------------------------------------------------------------------------------------------------------------- SECTION IV -- FIRE & EXPLOSION DATA -------------------------------------------------------------------------------------------------------------------------------------------
Flash point: 145 degree F Flammable Limits: LEL: 0.6 VEL: 7.0 Extinguishing media: CO2 , dry chemical, water fog
GAMSOL MSDS PAGE 2
Special firefighting procedures: water or foam may cause frothing if directed into container of burning material. Use water to cool containers exposed to heat. Unusual fire & explosion hazards: contaminated rags or other easily ignited organic materials are spontaneously combustible. Immerse in water after use. Reactivity: product is stable Hazardous polymerization: will not occur Conditions to avoid: None known. Hazardous decomposition products: Fumes, smoke, carbon monoxide, aldehydes and other decomposition products, in the case of incomplete combustion. Usual products of combustion: CO, CO2 and possibly acrolein. ------------------------------------------------------------------------------------------------------------------------------------------- SECTION V -- HEALTH HAZARD DATA ------------------------------------------------------------------------------------------------------------------------------------------- Route(s) of entry: Eye contact, ingestion, inhalation, skin contact. Acute health effects: Eye contact may cause redness or irritation Inhalation: dizziness, headache, nausea, possible nervous system depression. Ingestion: Nausea, gastrointestinal irritation, or vomiting. Skin contact: May cause rash, cracking, dryness or defatting of skin. EMERGENCY FIRST AID PROCEDURES: Eye contact: wash with clean water for at least fifteen minutes. If irritation persists, get medical attention. Inhalation: If overcome by vapor, remove from exposure and call a physician immediately. If breathing is irregular or has stopped, start resuscitation, administer oxygen, if available. Skin contact: In case of skin contact, wash skin thoroughly with soap and water. CHRONIC HEALTH EFFECTS: Skin contact may aggravate an existing dermatitis. ----------------------------------------------------------------------------------------------------------------------------------------- SECTION VI -- SPILL OR LEAK PROCEDURE ----------------------------------------------------------------------------------------------------------------------------------------- Steps to be taken in case material is spilled: remove all sources of ignition. Soak up spill with absorbent materials. Waste disposal method: Rags and absorbent materials should be immersed in water. Small amounts can be dried and disposed of as ordinary trash. ------------------------------------------------------------------------------------------------------------------------------------------- SECTION VII - SPECIAL PROTECTION DATA ------------------------------------------------------------------------------------------------------------------------------------------- Respiratory protection: Use supplied-air respiratory protection in confined or enclosed spaces, if needed. Ventilation: Use only with venilation sufficient to prevent exceeding recommended exposure limit or buildup of explosive concentrations of vapor in air. No smoking, flame or other ignition sources. Protective gloves: Use chemical-resistant gloves, if needed, to avoid prolonged or repeated skin contact. Eye protection: safety glasses if eye contact is likely; eyewash fountain should be accessible. ------------------------------------------------------------------------------------------------------------------------------------------- SECTION III -- STORAGE & HANDLING DATA ------------------------------------------------------------------------------------------------------------------------------------------- Precautions to be taken in handling and storage: store away from high temperature, sparks or open flame. Read and observe all precautions on product label. Other precautions: wash hands after use. Immerse contaminated rags in water. The information contained herein is based on the data available to use and is believe to be correct. However, Gamblin Artists Colors Co. makes no warranty, expressed or implied, regarding the accuracy of these data or the results to be obtained from the use thereof. Gamblin assumes no responsibility for injury from the use of the product described herein.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Neo-megilp 8 Oz
|
List Price $13.45 Sale Price: $10.09
In Stock!
|
|
|

Neo Megilp oil painting medium is a soft, silky gel. It gives paint body, decreases viscosity, and can produce a luminous Turner-like atmosphere, suspending and supporting paint in a soft gel. Made from contemporary materials so it will not turn yellow or dark, Megilp can replace Maroger Medium for artists who love the working properties but are concerned about Maroger’s poor aging properties.
|
|
 |
 |
 |
 |
|
|
|
|
 |
|
Neo-megilp 16 Oz
|
List Price $22.95 Sale Price: $16.29
In Stock!
|
|
|

Neo Megilp oil painting medium is a soft, silky gel. It gives paint body, decreases viscosity, and can produce a luminous Turner-like atmosphere, suspending and supporting paint in a soft gel. Made from contemporary materials so it will not turn yellow or dark, Megilp can replace Maroger Medium for artists who love the working properties but are concerned about Maroger’s poor aging properties.
|
|
 |
 |
 |
 |