Join our mailing list!



You are here: > Airbrush > Airbrushes > Iwata Airbrushes > Iwata Kustom Series Airbrushes > Parts for Iwata Kustom Series Airbrushes > Parts for Iwata Kustom CM
Parts for Iwata Kustom Micron CM

Scroll down to see exploded parts diagram
Sort By:
Page of 1
Fluid Needle 0.23 mm - I-540-3
List Price: $27.30
Our Price: $19.88
In Stock

Iwata airbrush part I-165-1
I-165-1 Spanner Wrench
List Price: $6.18
Our Price: $4.50
In Stock

This spanner wrench is for removing the fluid nozzle. Do not over-tighten!
I-190-2 Packing O-Ring for MAC valve
List Price: $6.18
Our Price: $4.50
In Stock

I-535-1C Fluid-Head Nozzle Cap 0.18mm
I-535-1C Fluid-Head Nozzle Cap 0.18mm
List Price: $42.49
Our Price: $30.94
In Stock

This is the replacement I-535-1C Fluid-Head Nozzle Cap 0.18mm for The Iwata Kustom CM, Custom Micron CM-B and Custom Micron CM-SB.
I-535-1D Needle Crown Cap
List Price: $20.86
Our Price: $15.19
In Stock

I-535-2 Fluid Head System 0.23 mm
List Price: $177.93
Our Price: $129.56
In Stock

I-535-2B Fluid Head Nozzle 0.23 mm
List Price: $63.35
Our Price: $46.13
In Stock

I-535-2C Fluid-Head Nozzle Cap 0.23mm
I-535-2C Fluid-Head Nozzle Cap 0.23mm
List Price: $42.49
Our Price: $30.94
In Stock

This is the replacement I-535-2C Fluid-Head Nozzle Cap 0.23mm for The Iwata Kustom CM, Custom Micron CM-B, CM-C, CM-C Plus and CM-SB.
Iwata airbrush replacement part I-570-1
I-570-1 Needle Spring
List Price: $10.30
Our Price: $7.50
In Stock

This is the replacement I-570-1 Needle Spring for Iwata Custom Micron and Kustom CM airbrushes.
I-580-1 Packing - Valve Piston O-ring
List Price: $10.30
Our Price: $7.50
In Stock

I-580-3 Packing Fluid Needle (O-ring)
List Price: $10.30
Our Price: $7.50
In Stock

I-718-1 Fluid Cup Lid
List Price: $13.65
Our Price: $9.94
In Stock

Iwata Pistol-grip Filter
List Price: $31.68
Our Price: $20.28
In Stock

For clean, dry air-flow. Attaching directly onto the airbrush, the Iwata-Medea Pistol-Grip Filter is the final defense to deliver clean, dry air to your airbrush. Miniature in size, the super-fine, 5-micron filter element performs like a full-size filter separator. The clear filter bowl allows a visual inspection of built-up moisture and is evacuated through a spring-loaded release valve - without taking the filter off the airbrush. Comfortable in the hand, the Pistol-Grip Filter acts as a handle on the airbrush to relieve muscle tension.