You are here: > Airbrush > Airbrushes > Iwata Airbrushes > Iwata Kustom Series Airbrushes > Parts for Iwata Kustom Series Airbrushes > Parts for Iwata Kustom CH
Parts for Iwata Kustom CH

Scroll down to see exploded parts diagram
Sort By:
Page of 1
Fluid Needle 0.3 mm - I-075-3
List Price: $13.65
Our Price: $9.94
In Stock

Fluid Nozzle 0.3 mm - I-080-8
List Price: $42.49
Our Price: $30.94
In Stock

I-030-4 Air Valve Set
List Price: $42.49
Our Price: $30.94
In Stock

I-105-0 Crown Cap (Optional)
List Price: $20.86
Our Price: $15.19
In Stock

 Can replace the needle cap on most Iwata airbrushes

 Decreases paint build-up on the needle and in the nozzle cap, eliminating spitting

 Shorter length allows for finer detail work while still protecting the needle

I-110-2 Needle Cap
List Price: $10.30
Our Price: $7.50
(Out of Stock)

I-135-1 Needle Spring
List Price: $6.18
Our Price: $4.50
In Stock

I-140-3 Nozzle Cap 0.3 mm
List Price: $19.00
Our Price: $14.25
(Out of Stock)

I-145-1 Packing for air piston (O-ring)
List Price: $6.18
Our Price: $4.50
In Stock

I-155-6 Pre-set cutaway handle
List Price: $42.49
Our Price: $30.94
In Stock

Iwata airbrush part I-165-1
I-165-1 Spanner Wrench
List Price: $6.18
Our Price: $4.50
In Stock

This spanner wrench is for removing the fluid nozzle. Do not over-tighten!
I-175-1 Valve Piston
List Price: $6.18
Our Price: $4.50
In Stock

I-190-2 Packing O-Ring for MAC valve
List Price: $6.18
Our Price: $4.50
In Stock

I-605-1 Packing (O-ring)
List Price: $6.18
Our Price: $4.50
In Stock

I-718-1 Fluid Cup Lid
List Price: $13.65
Our Price: $9.94
In Stock

I-725-1 PTFE Needle Packing
List Price: $10.30
Our Price: $7.50
In Stock

Iwata Pistol-grip Filter
List Price: $32.00
Our Price: $20.48
In Stock

For clean, dry air-flow. Attaching directly onto the airbrush, the Iwata-Medea Pistol-Grip Filter is the final defense to deliver clean, dry air to your airbrush. Miniature in size, the super-fine, 5-micron filter element performs like a full-size filter separator. The clear filter bowl allows a visual inspection of built-up moisture and is evacuated through a spring-loaded release valve - without taking the filter off the airbrush. Comfortable in the hand, the Pistol-Grip Filter acts as a handle on the airbrush to relieve muscle tension.
Iwata airbrush part I-545-3
Main Lever - I-545-3
List Price: $13.65
Our Price: $9.94
In Stock